IndividualsOrder
Order
your IQTrack.
4G GPS trackers for cars and motorcycles, from €159 including VAT and the first year’s subscription. You or your electrician fit it, and you activate it in the app.
4G trackers
made in Europe.
IQTrack trackers are made by Teltonika, which designs and builds them in Lithuania.
FMC130
Teltonika · with engine lock- Network
- 4G LTE Cat 1, plus 3G and 2G
- Satellites
- GPS, GLONASS, Galileo, BeiDou
- Bluetooth
- 4.0 + LE
- Backup battery
- 170 mAh
- Inputs and outputs
- 3 + 3, for ignition and relay
- Power supply
- 10–30 V
- Dimensions
- 65 × 56 × 21 mm
- Weight
- 55 g
FMC880
Teltonika · waterproof, 2 wires- Network
- 4G LTE Cat 1, plus 2G
- Satellites
- GPS, GLONASS, Galileo, BeiDou, dual frequency (L1 and L5)
- Bluetooth
- 4.0 + LE
- Backup battery
- 170 mAh
- Protection
- Waterproof, IP65
- Power supply
- 10–30 V, on the battery
- Dimensions
- 92.5 × 57.6 × 14 mm
- Weight
- 63 g
A European maker of vehicle tracking devices, with its headquarters and factories in Lithuania. The research firm Berg Insight ranks it first in telematics devices fitted in vehicles.
Fitting it,
step by step.
You connect the motorcycle tracker yourself, with two wires. In a car, the engine lock needs an electrician.
Tracker
- 1Power, 10–30 V
- 7Ground
- 8To relay pin 85
- 5Starter wire (12 V)
Relay
- 86Power, 10–30 V
- 85Tracker wire 8
- 87or 87a: starter wire
- 30Starter wire
- 1Power and ground
Pin 1 to power (10–30 V) and pin 7 to ground.
- 2Ignition
Pin 5 to the starter wire (12 V), so the tracker knows when the engine is running.
- 3Engine lock, by an electrician
The starter wire is cut: one end goes to relay pin 30, the other to 87 or 87a. Pin 86 goes to power and 85 to tracker pin 8.
- 4In the app
You type in the 15-digit IMEI printed on the tracker.
- 1The battery
Find the motorcycle’s battery and take off its cover if you need to.
- 2A clean surface
Clean any dust and dirt off the spot.
- 3Stick the tracker on
With the double-sided tape on its back, on top of the battery, with the LEDs and the GNSS antenna facing up.
- 4Two wires
Red to the positive terminal (+), black to the negative (−). The LEDs start blinking.
- 5In the app
You type in the 15-digit IMEI printed on the tracker.
In the app
Enter the IMEI number of your device below
The 15 digits are printed on the tracker.
And it’s locked.If it moves, your phone tells you, wherever you are.